LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 1993 >> Elantra L4-1.8L >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Exhaust Gas Recirculation >> Testing and Inspection >> Federal Models
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Federal Models





1. Disconnect the vacuum hose (green stripe) from the throttle body, and connect a vacuum pump to the vacuum hose.





2. Check the above points when the engine coolant temperature is 50° C (122° F) or below (cold) and when engine coolant temperature is 8O - 95° C (176 - 205° F) or higher (warm).

Vacuum Source Inspection

NOTE: Verify that engine coolant temperature is 80 - 95° C (176 - 205° F).

1. Disconnect the vacuum hose from the throttle body exhaust gas recirculation vacuum nipple and connect a hand vacuum pump to the nipple.
2. Start the engine and check to see that, after raising the engine speed by racing the engine, E port vacuum rises proportionately with the rise in engine speed. If there is a problem with the change in vacuum, it is possible that the throttle body E port may be clogged and require cleaning.
scientia non olet · About LEMON Manuals