LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 1989 >> Excel GS, Standard >> Repair and Diagnosis >> Electrical >> Starter >> Testing >> Solenoid Tests >> Hold-In Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Hold-In Test

  1. Disconnect "M" terminal. Apply 12 volts to "S" terminal and ground case to pull in plunger. See Fig 1. If pinion remains out (plunger is pulled-in), hold-in coil is good. If not, replace solenoid.
Fig 1: Solenoid Return Test
G29415Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals