LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2010 >> H3 Base, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Repair Instructions >> Repair Instructions >> Ignition Lock Cylinder Control Solenoid Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

    Fig 1: Lock Cylinder Solenoid
    GM1663830Courtesy of GENERAL MOTORS CORP.
  1. Install the ignition lock cylinder solenoid.
  2. Install the steering column shroud. Refer to Steering Column Shroud Replacement .
  3. Enable the SIR system. Refer to SIR Disabling and Enabling .
scientia non olet · About LEMON Manuals