LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2010 >> H3 Alpha >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls And Fuel - 3.7L - Repair Instructions) >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Accelerator Pedal Position Sensor Electrical Connector
    GM1560064Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the accelerator pedal position (APP) sensor electrical connector.
    2. Fig 2: Accelerator Pedal Position Sensor
    GM1560065Courtesy of GENERAL MOTORS CORP.
  2. Remove the accelerator pedal/APP sensor nuts.
  3. Remove the accelerator pedal/APP sensor from the vehicle.
scientia non olet · About LEMON Manuals