LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2009 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls And Fuel - 5.3L - Introduction) >> Repair Instructions >> Evaporative Emission System Hose/Pipe Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Fuel Tank Lines
    GM1564233Courtesy of GENERAL MOTORS CORP.
  1. Secure the EVAP pipe (2) to the clip on the fuel tank.
  2. Refer to Plastic Collar Quick Connect Fitting Service  in order to connect the EVAP pipe to the following:
    • The fuel tank module
    • The fuel tank vent valve
  3. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About LEMON Manuals