LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 206 (Power Steering System) >> Repair Instructions >> Power Steering Pump Pulley Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Power Steering Pump Pulley Installer
    GM643361Courtesy of GENERAL MOTORS CORP.
  1. Install the power steering pump pulley using installer J 25033-C  .
    2. Fig 2: Measuring Axial Tolerance Of Power Steering Pulley On Pump
    GM254752Courtesy of GENERAL MOTORS CORP.
  2. Ensure that the axial tolerance of the power steering pump pulley on the power steering pump is within 0.25 mm (0.010 in).
  3. Install the appropriate belt on the power steering pump pulley. Refer to Air Conditioning Compressor and Power Steering Pump Belt Replacement for the 3.6L (LY7) engine or Water Pump and Air Conditioning Compressor and Power Steering Pump Belt Replacement for the 4.6L (LH2) engine.
scientia non olet · About LEMON Manuals