LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2007 >> H3 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Stationary Window System) >> Repair Instructions >> Windshield Side Reveal Molding Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Windshield Reveal Molding & Auxiliary Weatherstrip
    GM1331304Courtesy of GENERAL MOTORS CORP.
  1. Install the reveal molding under the air inlet panel grille.
  2. Align the reveal molding to the pinchweld flange and to the top roof header.
  3. Press the reveal molding (1) onto the pinchweld flange.
  4. Reposition the auxiliary weatherstrip (2).
  5. Close the doors.
scientia non olet · About LEMON Manuals