LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2007 >> H2 4D Utility Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 698 (Wiper System & Washer System) >> Repair Instructions >> Washer Solvent Container Level Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2006 GMC Sierra and 2006 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the washer solvent container. Refer to Washer Pump/Reservoir Replacement .
  2. Using a small flat-bladed tool, remove the washer solvent container level sensor (1) and seal (2) from the container.
    Fig 1: Removing Washer Solvent Container Level Sensor
    GM1328316Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals