LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2007 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel And Console Trim >> Repair Instructions >> Console Shift Lever Bezel Replacement >> Installation Procedures
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedures

    Fig 1: Cup Holder
    GM833291Courtesy of GENERAL MOTORS CORP.
  1. Connect the lamps to the bezel.
  2. Align the bezel to the center console.
  3. Push the bezel firmly into place to engage the clips.
    4. Fig 2: Identifying Shifter
    GM833294Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  4. Install shift handle to shifter and use hex nut to fasten in place.

    Tighten:  Tighten the nut to 1.6 N.m (14 lb in).

scientia non olet · About LEMON Manuals