LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2006 >> H3 L5-3.5L >> Repair and Diagnosis >> Body and Frame >> Body Control Systems >> Body Control Module >> Diagrams >> Diagnostic Aids >> General Electrical Diagnostic Procedures >> Checking Aftermarket Accessories
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Checking Aftermarket Accessories



CHECKING AFTERMARKET ACCESSORIES

Do not connect aftermarket accessories into the following circuits:

CAUTION: Refer to SIR Caution in Service Precautions.

- SIR circuits, all such circuits are indicated on circuit diagrams with the SIR symbol.

NOTE: Refer to OBD II Symbol Description Notice in Service Precautions.

- OBD II circuits, all such circuits are indicated on circuit diagrams with the OBD II symbol.

Always check for aftermarket accessories (non-OEM) as the first step in diagnosing electrical problems. If the vehicle is so equipped, disconnect the system to verify that these add-on accessories are not the cause of the problems.

Possible causes of vehicle problems related to aftermarket accessories include:
- Power feeds connected to points other than the battery
- Antenna location
- Transceiver wiring located too close to vehicle electronic modules or wiring
- Poor shielding or poor connectors on antenna feed line
- Check for recent service bulletins detailing installation guidelines for aftermarket accessories.