LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2005 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

    Fig 1: Connecting Fuel Level Sensor Electrical Connectors To Module Connector
    GM818018Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel sender. Refer to Fuel Sender Assembly Replacement .
  2. Place the fuel sender on a clean work surface.
  3. Disconnect the fuel level sensor electrical connector (1) from the module connector.
    4. Fig 2: Removing Fuel Level Sensor Retaining Clip
    GM818020Courtesy of GENERAL MOTORS CORP.
  4. Remove the fuel level sensor retaining clip.
  5. Squeeze the retaining tabs together in order to slide the fuel lever sensor off of the reservoir.
scientia non olet · About LEMON Manuals