LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2004 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Steering >> Steering Linkage (Non-Rack & Pinion) >> Repair Instructions >> Steering Damper Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

    Fig 1: Steering Damper Ball Stud Nut
    GM793268Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Support the vehicle with safety stands. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the engine protection shield. Refer to Engine Protection Shield Replacement in Frame and Underbody.
  3. Remove the steering damper ball stud nut.

    Do not reuse the nut.

    4. Fig 2: Removing Steering Damper Ball Stud From Relay Rod Using J 24319-B
    GM397364Courtesy of GENERAL MOTORS CORP.
  4. Remove the steering damper ball stud from the relay rod using the J 24319-B  . See Special Tools and Equipment .
    5. Fig 3: Steering Damper Ball Stud Nut
    GM793268Courtesy of GENERAL MOTORS CORP.
  5. Remove the steering damper mounting bolt and the nut.

    Do not reuse the bolt or nut.

  6. Remove the steering damper from the vehicle.
  7. Inspect the steering damper for leaks and damage.
scientia non olet · About LEMON Manuals