LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2004 >> H2 4D Utility Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (Starters) >> Removal & Installation >> Battery Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2003 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the battery insulator, if necessary.
  2. Install the battery.
  3. Install the battery hold down retainer and bolt. Tighten the battery hold down retainer bolt to 25 N.m (18 lb ft).
  4. Connect the positive battery cable. Tighten the positive battery cable bolt to 17 N.m (13 lb ft).
  5. Connect the negative battery cable. Refer to BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE (SINGLE BATTERY) .
scientia non olet · About LEMON Manuals