LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 569 (Interior Trim) >> Repair Instructions >> Console Replacement - Overhead (Short Length) >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connectors.
    2. Fig 1: Using Hot Melt Glue Gun To Align Console To Headliner Holes
    GM898176Courtesy of GENERAL MOTORS CORP.
  2. Using a hot melt glue gun, run a bead of glue on tabs and align the console to the headliner holes.
    3. Fig 2: Overhead Console Screws (Short Length)
    GM827786Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the console roof screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  4. Check for console operation.
scientia non olet · About LEMON Manuals