LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Doors, Mirrors & Windows >> Repair Instructions >> Module Replacement - Front Power Window >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

  1. Remove the trim panel. Refer to Trim Panel Replacement - Side Front Door .
  2. Remove the water deflector. Refer to Water Deflector Replacement - Front Door .
  3. Position the window in a position that allows access to the window clamp bolts.
    4. Fig 1: Front Power Window Module
    GM838386Courtesy of GENERAL MOTORS CORP.
  4. Loosen the fasteners on the window clamps.
  5. Position the window in the full up position and tape in place.
  6. Disconnect the window motor electrical connector.
  7. Remove the 5 fasteners (1) retaining the window module to the door.
  8. Remove the window module from the door.
scientia non olet · About LEMON Manuals