Confirmation Procedure

Perform the following procedures in order. If the failure is duplicated, the confirmation procedure is completed.

• Procedure 1
  1. Insert the emergency fuel funnel into the fuel filler neck - Refer to: Fuel Pressure Test or Fuel Pressure Relieving .
     NOTE:

     The emergency fuel funnel is stored in the trunk tool box.

  2. Turn the vehicle to the ON mode.
  3. If the HDS [FTP Sensor Voltage] value is less than 0.21 V, the failure is duplicated.
• Procedure 2
  1. Start the engine and let it idle.
  2. Monitor the HDS [OBD STATUS (PGM-FI)] for DTC P0452.