October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

DTC Troubleshooting: B1080 (Relay Control Module): Inspection

IG1_FUEL_PUMP Circuit Inspection

Test Procedure

Preparation
- Body control module connector A (66P): disconnected
Procedure
- Perform the inspection according to the following table.


			(Connected) Body control module connector A (66P) female terminals
		IG Mode	Courtesy of HONDA, U.S.A., INC.	Normal Conditions
	IG1_FUEL_PUMP circuit inspection	OFF		12 V battery voltage [circuit type 1]

Results

If it is abnormal, there is a problem in the circuit.
If the power supply inspection of the above table showed abnormally, do the additional Power Supply Inspection , to locate the failure.