VSA Sensor Neutral Position Memorization: Procedure
How to use this service information .
NOTE:
The VSA sensor neutral position must be learned whenever you do any of these actions:
- Updating or replacing the VSA modulator-control unit.
- Removing the steering wheel.
- Disconnecting the steering joint.
- Wheel alignment adjustment.
- Updating or replacing the SRS unit.
- VSA Sensor Neutral Position - Memorize
Preconditions
- Set the steering wheel in the straight ahead position.
- Vehicle on Level Ground
- HDS Connected
Procedure
NOTE:Do not press the brake pedal during this procedure.
- Select the following menu buttons on the HDS screen in sequence.
-
- ABS/VSA (System Selection Menu)
- ADJUSTMENT
- ALL SENSOR