DTC 1304
DTC 1304 : Gyro Error 1
NOTE:
- Check the vehicle 12 volt battery condition first .
- This navigation DTC sets when there is a problem with the output voltage of the internal gyro sensor
- Before you troubleshoot, make sure to follow the General Troubleshooting Information .
- Check any official Honda service website for more service information about the navigation system.
- Problem verification
-1. Clear the hard error codes .
-2. Turn the vehicle to the OFF (LOCK) mode.
-3. Wait for at least 6 seconds.
-4. Turn the vehicle to the ON mode, and wait at least 1 minute.
-5. Check for hard error codes .
Is DTC 1304 indicated?
YES
Replace the audio-navigation unit .
NO
Intermittent failure, the system is OK at this time.