DTC U0073 (Keyless Access Power Control Unit)
WARNING: This page is about a different variant/trim than selected.
DTC U0073 : F-CAN Communication Bus Line Error
NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A .
| DTC Description | DTC |
|---|---|
| U0073 F-CAN Communication Bus Line Error |
DTC (Keyless Access Power Control Unit)
- Problem verification
-1. Clear the DTCs with the HDS.
-2. Turn the vehicle to the OFF (LOCK) mode and then the ON mode.
-3. Wait for at least 6 seconds.
-4. Check for DTCs with the HDS.
DTC Description DTC U0073 F-CAN Communication Bus Line Error Is DTC U0073 indicated?
YES
Go to the troubleshooting for CAN gateway system DTC(s) .
NO
Intermittent failure, the system is OK at this time.