September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Tailgate Outer Handle Switch Test/Replacement: Test
- Remove the tailgate lower trim panel (see
TRIM REMOVAL/INSTALLATION - TAILGATE AREA
).
- Disconnect the 2P connector (A) from the tailgate outer handle switch.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Check for continuity between the terminals in each switch position according to the figure below.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- If the continuity is not as specified, replace the tailgate outer handle switch.