Tailgate Outer Handle Switch Test/Replacement
- Remove the tailgate lower trim panel (see TRIM REMOVAL/INSTALLATION - TAILGATE AREA ).
- Disconnect the 2P connector (A) from the tailgate harness (B).
- Check for continuity between tailgate outer handle switch 2P connector terminals No. 1 and No. 2.
- There should be continuity when the tailgate outer handle is pulled.
- There should be no continuity when the tailgate outer handle is released.
- Remove the tailgate handle (see TAILGATE HANDLE REPLACEMENT ).
- Remove the six screws and the outer cover (A).
- Remove the two screws and the tailgate outer handle switch (B).