EPS Control Unit Inputs and Outputs for Connector A (11P)
CONNECTOR TERMINAL DESCRIPTION
| Terminal Number | Wire color | Terminal sign (Terminal name) | Description | Signal |
|---|---|---|---|---|
| 1 | WHT | + B EPS MTR (Plus battery) | Power source for the actuator EPS motor | Battery voltage (about 12V) at all times |
| 2 | BLK | EPS GND (Power ground) | Ground for the EPS control unit | Continuity to ground |
| 3 | LT BLU | NEP (Engine speed pulse) | Detects engine speed signal | With engine running: pulses |
| 4 | ORN | MG1 | Ground for the motor | -- |
| 5 | BLU | K-LINE (Data link connector) | Communicates with HDS | Pulse voltage (digital signal) |
| 6 | YEL | MG2 | Ground for the motor | -- |
| 7 | GRN | F-CAN H (F-CAN HI) | F-CAN communication circuit | -- |
| 8 | Not used | Not used | -- | -- |
| 9 | PNK | F-CAN L (F-CAN LO) | F-CAN communication circuit | -- |
| 10 | Not used | Not used | -- | -- |
| 11 | ORN | IG1 (Ignition 1) | Power source for activating the system | With ignition switch ON (II): battery voltage (about 12V) |