LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2014 >> Pilot Touring, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> HANDSFREELINK System >> HandsFreeLink Control Unit Removal/Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

HandsFreeLink Control Unit Removal/Installation

NOTE: Tell the customer they need to write down all phone numbers as there is no way to transfer the information in the original HandsFreeLink control unit to a new HandsFreeLink control unit.
  1. Remove the passenger's center console trim (see CENTER CONSOLE REMOVAL/INSTALLATION ).
  2. With navigation: Disconnect the connector (A).
    Fig 1: Connectors, Harness Clip, Stay And Bolts With Torque Specifications
    G08091352Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the connectors (B), and loosen the bolts (C). Detach the harness clip (D), then pull out the stay (E).
  4. Remove the screws (A) and the HandsFreeLink control unit (B).
    Fig 2: Identifying HandsFreeLink Control Unit And Screws
    G08091353Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the HandsFreeLink control unit in the reverse order of removal.

    After replacing the HandsFreeLink control unit, tell the customer:

    • They need to pair their phones to the system.
    • They need to set up their system preferences.
scientia non olet · About LEMON Manuals