LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2014 >> CR-V EX, 2.4L Eng, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Entry Lights Control System) >> Ignition Key Light Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Ignition Key Light Test

WARNING: This page is about a different car, the 2011 Honda CR-V, 2010 Honda CR-V, 2009 Honda CR-V, 2008 Honda CR-V, and 2007 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering column upper and lower covers (see STEERING COLUMN REMOVAL AND INSTALLATION ).
  2. Disconnect the 6P connector (A).
    Fig 1: Identifying Ignition Key Switch Terminals
    G06612266Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. The LED should come on when power is connected to terminal No. 6 and ground is connected to terminal No. 5.
  4. If the LED does not come on, replace the steering lock assembly (see STEERING LOCK REPLACEMENT ).