DTC P060A: PCM Internal Control Module Malfunction: Notes
NOTE:
Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information
See HOW TO TROUBLESHOOT THE A/T SYSTEM
or HOW TO TROUBLESHOOT THE FUEL AND EMISSIONS SYSTEMS
.
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| P060A PCM INTERNAL CONTROL MODULE MALFUNCTION |
- Problem verification:
- 1. Turn the ignition switch to ON (II).
- 2. Clear the DTC with the HDS See HOW TO TROUBLESHOOT THE A/T SYSTEM or HOW TO TROUBLESHOOT THE FUEL AND EMISSIONS SYSTEMS .
- 3. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC Freeze Frame P060A PCM INTERNAL CONTROL MODULE MALFUNCTION
Is DTC P060A indicated?
YES : Update the PCM See PCM REMOVAL AND INSTALLATION or PCM UPDATE if it does not have the latest software, or substitute a known-good PCM See PCM REMOVAL AND INSTALLATION or PCM UPDATE , then do the repair verification .
NO : Intermittent failure, the system is OK at this time.