LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2014 >> CR-V EX, 2.4L Eng, AWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Fuel & Emission System Troubleshooting & Testing >> CKP Pattern Clear/CKP Pattern Learn Procedure >> Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

CKP Pattern Clear/CKP Pattern Learn Procedure: Procedure

  1. HDS DLC - Connection
    1. Connect the HDS to the data link connector (DLC) (A) located under the driver's side of the dashboard.
    2. Turn the ignition switch to ON (II).
    3. Make sure the HDS communicates with the vehicle. If it does not communicate, go to the DLC circuit troubleshooting.
    Fig 1: Identifying Data Link Connector (DLC)
    G08892645Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. CKP Pattern - Clear/Learn
    1. Connect the HDS to the data link connector (DLC) (A) located under the driver's side of the dashboard.
    2. Turn the ignition switch to ON (II).
    3. Make sure the HDS communicates with the vehicle. If it does not communicate, go to the DLC circuit troubleshooting.
    4. Select CRANK PATTERN in the ADJUSTMENT MENU with the HDS.
    5. Select CRANK PATTERN CLEAR, and clear the CKP pattern.
    6. Select CRANK PATTERN LEARNING with the HDS, and follow the screen prompts.
    7. After learning, turn the ignition switch to LOCK (0).
    8. Disconnect the HDS from the DLC.
    Fig 2: Identifying Data Link Connector (DLC)
    G08892646Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals