LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2013 >> Fit Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> VTEC >> Rocker Arm Oil Control Valve Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Rocker Arm Oil Control Valve Removal/Installation

  1. Remove the harness holder (A).
    Fig 1: Identifying Harness Holder
    G05953097Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Disconnect the rocker arm oil control solenoid connector (A) and the rocker arm oil pressure switch connector (B).
    Fig 2: Identifying Rocker Arm Oil Control Solenoid Connector & Rocker Arm Oil Pressure Switch Connector
    G05953098Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the rocker arm oil control valve assembly (C) and the rocker arm oil control valve filter (D).
  4. Install the parts in the reverse order of removal with a new rocker arm oil control valve filter.
scientia non olet · About LEMON Manuals