LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2013 >> CR-Z EX, Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> PGM-FI System >> Knock Sensor Replacement
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Knock Sensor Replacement

  1. Disconnect the knock sensor connector (A).
    Fig 1: Lnock Sensor Connector And Knock Sensor With Torque Specifications
    G06949921Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the knock sensor (B).
  3. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals