LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2013 >> CR-Z EX, Automatic CVT Trans >> Repair and Diagnosis >> Engine Performance >> System >> VTEC >> Rocker Arm Oil Pressure Switch Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Rocker Arm Oil Pressure Switch Removal/Installation

  1. Disconnect the rocker arm oil pressure switch connector (A).
    Fig 1: Rocker Arm Oil Pressure Switch Connector, Rocker Arm Oil Pressure Switch And O-Ring With Torque Specifications
    G06950015Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the rocker arm oil pressure switch (B).
  3. Install the parts in the reverse order of removal with a new O-ring (C).
scientia non olet · About LEMON Manuals