September 30: LEMON manuals is back up on a temporary server! Slowness is possible
ECT Sensor 2 Replacement
- Drain the engine coolant (see
COOLANT REPLACEMENT
).
- Raise the vehicle on a lift (see
LIFT AND SUPPORT POINTS
).
- Remove the splash shield (see
SPLASH SHIELD REPLACEMENT
).
- Disconnect the ECT sensor 2 connector (A), then remove ECT sensor 2 (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Install the parts in the reverse order of removal with a new O-ring (C), then refill the radiator with engine coolant (see
COOLANT REPLACEMENT
).