October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Programming Immobilizer-Keyless Control Unit
- Have all registered keys and the ECM/PCM code.
- Connect the HDS to the data link connector (DLC).
- Turn the ignition switch to ON (II).
- Select IMMOBI from the System Selection Menu, then select IMMOBILIZER SETUP.
- Select REPLACE IMMOBILIZER RECEIVER/CONTROL UNIT.
- Do the registration according to the instructions on the HDS screen.
- Check that the engine can be started with all registered keys check that the door locks operate using the immobilizer key transmitter.