A/C Compressor Relief Valve Replacement
- Recover the refrigerant with a recovery/recycling/charging station (see REFRIGERANT RECOVERY ).
- Raise the vehicle on a lift, then remove the front splash shield (see FRONT SPLASH SHIELD REPLACEMENT ).
- Remove the relief valve (A) and the O-ring (B). Plug the opening to keep foreign matter from entering the system, and the A/C compressor oil from running out.
- Clean the mating surfaces.
- Replace the O-ring on the relief valve with a new one, and apply a thin coat of refrigerant oil before installing it.
- Remove the plug installed in step 3, then install and tighten the relief valve.
- Charge the system (see SYSTEM CHARGING ).