October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Using the HDS (Preferred method)

Connect the HDS to the Data Link Connector (DLC).

NOTE: There are two methods to read B-CAN codes with the HDS.

First method: Go to B-CAN System Diagnosis Test Mode A to check for DTCs (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).

Second method: Ground the SCS circuit with the HDS, then read the DTCs displayed in the gauge control module, then go to B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).