LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2012 >> Fit Base, Automatic Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating >> Blower Resistor Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Blower Resistor Test

  1. Disconnect the 4P connector (A) from the blower resistor.
    Fig 1: Identifying Blower Resistor 4P Connector
    G05959773Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Measure the resistance between the following terminals of the blower resistor, and compare them with the values in the table below.
    Fig 2: Identifying Switch Position Table
    G05959774Courtesy of AMERICAN HONDA MOTOR CO., INC.
    Fig 3: Measuring Resistance Between Blower Resistor Terminals
    G05959775Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. If the resistance is not within the specifications, replace the blower resistor.
scientia non olet · About LEMON Manuals