Communications Control Module: Service and Repair

HandsFreeLink Control Unit Removal/Installation

NOTE: Tell the customer they need to write down all phone numbers stored in the HFL and the navigation imported phone book as there is no way to transfer the information in the original HandsFreeLink control unit to a new HandsFreeLink control unit.

1. Remove the driver's dashboard lower cover Driver's Dashboard Lower Cover Removal/Installation.

2. Remove the mounting screws, then disconnect the connector (A) from the HandsFreeLink control unit (B) and remove it.





3. Install the HandsFreeLink control unit in the reverse order of removal.

After replacing the HandsFreeLink control unit, tell the customer:

- They need to pair their phones to the system.

- They need to set up their system preferences.