LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2010 >> Odyssey V6-3.5L >> Repair and Diagnosis >> Power and Ground Distribution >> Testing and Inspection >> Relay Control Module Input Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Relay Control Module Input Test




Relay Control Module Input Test

1. Remove the under-hood fuse/relay box under cover Under-Hood Fuse/Relay Box Removal/Installation.

2. Disconnect under-hood fuse/relay box connector K (10P).





3. Inspect the connector and socket terminals to be sure they are all making good contact.

- If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
- If the terminals look OK, go to step 4.

4. Reconnect the connector to the under-hood fuse/relay box, and do these input tests at the following connector.

- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, the relay control module must be faulty, replace the under-hood fuse/relay box.





scientia non olet · About LEMON Manuals