Set Speed Does Not Cancel When The Cancel Button Is Pressed

Set speed does not cancel when the cancel button is pressed

Diagnostic Procedure:

1. Check for PGM-FI DTCs. Initial Inspection and Diagnostic Overview

2. Do the cruise control input test. Component Tests and General Diagnostics Test the cruise control cancel switch signal input.

3. Do the cruise control set/decel, resume/accel, cancel switch test. Cruise Control Set/Decel, Resume/Accel, Cancel Switch Test/Replacement

Also check for:

- Open circuit, loose or disconnected terminals: LT GRN/RED or LT GRN/BLK wire