LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2009 >> S2000 CR >> Repair and Diagnosis >> Brakes >> Traction Control >> VSA (Vehicle Stability Assist) System Components >> VSA OFF Switch Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

VSA OFF Switch Test

  1. Turn the ignition switch to LOCK (0).
  2. Remove the instrument panel (see INSTRUMENT PANEL REMOVAL/INSTALLATION ).
  3. Remove the VSA OFF switch (A) by pushing from the back side of the instrument panel.
    Fig 1: Identifying VSA OFF Switch And Bolts
    G06232201Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Check for continuity between VSA OFF switch 6P connector terminals No. 1 and No. 6. There should be continuity when the button is pressed, and no continuity when the button is released.
    Fig 2: Checking Continuity Between VSA OFF Switch 6P Connector Terminals No. 1 And No. 6
    G06232202Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Check for continuity between VSA OFF switch 6P connector terminals No. 2 and No. 3. There should be continuity at all times.
    Fig 3: Checking Continuity Between VSA OFF Switch 6P Connector Terminals No. 2 And No. 3
    G06232203Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Install the VSA OFF switch in the reverse order of removal.
scientia non olet · About LEMON Manuals