Power Window Master Switch Test

Power Window Master Switch Test

1. Remove the grip cover. Service and Repair

2. Disconnect the 22P connector (A) from the power window master switch.






3. Check for continuity between the terminals in each switch position according to the tables.
Driver's Switch

The driver's switch is combined with the control unit so you cannot isolate the switch to test it. Instead, run the master switch input test procedures. Power Window Master Switch Input Test If the tests are normal, the driver's switch must be faulty. Replace the switch.

4. If the continuity is not as specified, replace the switch. Power Window Master Switch Replacement

Front Passenger's Switch





Right Rear Switch





Left Rear Switch