September 30: LEMON manuals is back up on a temporary server! Slowness is possible
ECT Sensor 1 Replacement
- Drain the engine coolant (see COOLANT REPLACEMENT
).
- Remove the intake manifold cover (see step 1 under INTAKE MANIFOLD REMOVAL AND INSTALLATION
).
- Disconnect the ECT sensor 1 2P connector (A).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove ECT sensor 1 (B).
- Install the parts in the reverse order of removal with a new O-ring (C), then refill the radiator with engine coolant (see COOLANT REPLACEMENT
).