LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2008 >> Pilot VP, 3.5 YF2 >> Repair and Diagnosis >> Engine Performance >> System >> Variable Cylinder Management (VCM) System >> EOP Sensor Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

EOP Sensor Removal/Installation

  1. Remove the intake manifold cover (see step 1 in REMOVAL ).
  2. Remove the EOP sensor 3P connector (A).
    Fig 1: Removing EOP Sensor 3P Connector (A) With Torque Specifications
    G04245386Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the EOP sensor (B).
  4. Install the EOP sensor in the reverse order of removal with a new O-ring (C).
scientia non olet · About LEMON Manuals