LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2008 >> Pilot SE, 3.5 YF2 >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> A/F Sensor Replacement >> Rear Bank (Bank 1)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Rear Bank (Bank 1)

  1. Remove the engine cover (see step 1 under IGNITION COIL REMOVAL/INSTALLATION ).
  2. Disconnect the rear A/F sensor 8P connector (A), then remove the rear A/F sensor (B).
    Fig 1: Rear A/F Sensor With Torque Specifications
    G05593763Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the parts in the reverse order of removal.