LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2008 >> Element SC, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> A/C Compressor >> Heating/Air Conditioning >> Heating/Air Conditioning >> Receiver/Dryer Desiccant Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Receiver/Dryer Desiccant Replacement

  1. Remove the A/C condenser (see A/C CONDENSER REPLACEMENT  ).
  2. Remove the cap (A) from the bottom of the A/C condenser, then remove the O-rings (B), the filter (C) and the desiccant (D).
    Fig 1: Identifying Receiver/Dryer Desiccant, Cap, O-Rings And Filter
    G06680563Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the desiccant in the reverse order of removal, and note these items:
    • Replace the O-rings with new ones, and apply a thin coat of refrigerant oil (DENSO ND-OIL 8) before installing them.
    • Be sure to use the correct O-rings for HFC-134a (R-134a) to avoid leakage.
scientia non olet · About LEMON Manuals