LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2007 >> Ridgeline RTL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Input Shaft (Mainshaft) Speed Sensor Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Input Shaft (Mainshaft) Speed Sensor Replacement

  1. Remove the splash shield (see FRONT SPLASH SHIELD REPLACEMENT ).
  2. Disconnect the input shaft (mainshaft) speed sensor connector, and remove the input shaft (mainshaft) speed sensor (A).
    Fig 1: Input Shaft (Mainshaft) Speed Sensor With Torque Specifications
    G05592405Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the new O-ring (B) on the new input shaft (mainshaft) speed sensor, then install the input shaft (mainshaft) speed sensor in the transmission housing.
  4. Check the connector for rust, dirt, or oil, then connect the connector securely.
  5. Install the splash shield (see FRONT SPLASH SHIELD REPLACEMENT ).
scientia non olet · About LEMON Manuals