LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2007 >> Ridgeline RTL >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> PGM-FI System >> IAT Sensor Replacement
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

IAT Sensor Replacement

  1. Remove the intake manifold cover (see step 1 under INTAKE MANIFOLD REMOVAL AND INSTALLATION ).
  2. Disconnect the IAT sensor 2P connector (A).
    Fig 1: IAT Sensor 2P Connector With Torque Specifications
    G05592203Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the IAT sensor (B).
  4. Install the parts in the reverse order of removal with a new O-ring (C).
scientia non olet · About LEMON Manuals