LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2007 >> Ridgeline RT >> Repair and Diagnosis (Single Page) >> Engine Performance >> Tune-Up >> Ignition System >> Ignition Coil Removal/Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Ignition Coil Removal/Installation

  1. Remove the intake manifold cover.
    Fig 1: Removing Intake Manifold Cover
    G03688089Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Disconnect the ignition coil connectors (A), then remove the front bank ignition coils (B).
    Fig 2: Removing Front Bank Ignition Coils With Torque Specifications
    G03688090Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the ignition coil connectors (A), then remove the rear bank ignition coils (B).
    Fig 3: Disconnecting Ignition Coil Connectors And Removing Rear Bank Ignition Coils With Torque Specifications
    G03688091Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the ignition coils in the reverse order of removal.
scientia non olet · About LEMON Manuals