October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
VSA Modulator-Control Unit Removal and Installation: Removal
- Turn the ignition switch to LOCK (0).
- Disconnect the VSA modulator-control unit 47P connector (A) by pushing down the lever (B); the connector disconnects itself.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Disconnect the six brake lines from the VSA modulator-control unit (C).
NOTE:
Brake lines are connected to the master cylinder (D) and to the right-front (E), the left-rear (F), the right-rear (G), and the left-front (H) brake systems.
- Remove the VSA modulator-control unit with the bracket (I) from the body.
- Remove the three Torx bolts, then remove the VSA modulator-control unit from the bracket.