VSA OFF Switch Test
- Turn the ignition switch to LOCK (0)
- Remove the driver's dashboard outer panel (A) (see DRIVER'S DASHBOARD OUTER PANEL REMOVAL/INSTALLATION ).
- Push out the VSA OFF switch (B) from the back side of the instrument panel.
- Disconnect the VSA OFF switch 6P connector (C), and remove the switch.
- Check for continuity between VSA OFF switch 6P connector terminals No. 2 and No. 3. There should be continuity when the switch is pressed, and no continuity when the switch is released.
- Check for continuity between VSA OFF switch 6P connector terminals No. 5 and No. 6. There should be continuity at all times.
- Install the VSA OFF switch in the reverse order of removal.