LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2007 >> Fit Base, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Dashboard >> Driver's Switch Trim Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Driver's Switch Trim Removal/Installation

NOTE: Take care not to scratch the dashboard and related parts.
  1. Remove the dashboard/ steering hanger beam (see DASHBOARD/ STEERING HANGER BEAM REMOVAL/INSTALLATION ).
  2. Remove the screws, then remove the driver's switch trim (A).
    Fig 1: Identifying Driver's Switch Trim Fastener Locations
    G05456258Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the trim in the reverse order of removal.
scientia non olet · About LEMON Manuals